Technical information Crab range

L o c k b a r r i e r Loading Making safe Unloading The lock barrier protects workers during site supplying operations. It is made using two side sections with pivots, linked with four standard ledgers, and can be fitted with steel toeboards locked with a single joint. The receiving section must be at least 2.00 m deep. Footprint of the package 3 4 P r o t e c t i v e s c r e e n Sheet pin It is used for covering and cladding structures. It is made of a flat of 20 x 4 mm thick. Part number Description Weight (kg) 102249-0 Sheet pin 0.21 Opening load capacity: 20 daN Crab prtective screen arm The protective screen arm is fixed to the nodes at deck level. Part number Description Weight (kg) 250300-1 Crab protective screen arm 14.00 Part number Description Weight (kg 250901-6 Side section of lock barrier 14.20 250902-4 Lock barrier pivot 1.70 Height of package Maximum depth Maximum width H package ≤ 0.90 m 1.70 m Section - 0.10 m 0.90 m < H package ≤ 1.50 m 1.20 m Section - 0.65 m 1.97 m 0.12 m 1.70 m 1.00 m For sites exposed to high winds and snow, a tube must be added between the scaffolding and the end of the canopy arm and more pins added. 1 2 1 2 Must not be handled if anyone is in the unloading area. 0.90 m Protective screen Outer element protecting workers against falling rubble or materials. It is fitted with 2.20 m sheets fixed directly to the top and bottom ledgers with 4 pins every linear metre of attachment line. The scaffolding must be anchored to the wall at the canopy arm point. Depth Width 01.11.17 T e c h n i c a l i n f o r m a t i o n