Technical information Crab range

To u r é c h a f : e r g o n o m i c s 114 Ergonomic equipment The Touréchaf has been specially designed to alleviate musculoskeletal injuries (MSI). Standard parts weigh less than 15 kg and are easy to handle. The design makes it easy to lift the tower by crane to reduce the number of times it has to be dismantled and assembled. Lifting The tower has integral lifting rings so that it can be moved by crane. This operation is easy and safe as the frames forming the tower are clamped automatically in position. Storage The frames are stored vertically, ready to be assembled, and so there is no need to bend down to pick them up. Moving The towers can be moved easily by hand on a flat, firm surface using the special trolleys. Do not shift any tower taller than 3 frames. Access 2 access decks should be fitted every 2.00 m as "scaffold" landings. Handling The Touréchaf frame is fitted from inside the tower to a single attachment point. Fitting the deck To make it easier to fit the deck, hold the end in position with the right elbow and fit the 2 hooks under the ladder first. Lower the deck while leaning on the frame. Raising the deck from below There are two handles under the deck so that it can be raised easily. 4 levels 5 levels min. 17 cm 01.11.17 T e c h n i c a l i n f o r m a t i o n