Technical information Crab range

Touréchaf : Assembl ing and dismant l ing a 1.00 x 1.00 m tower Requirements > Ensure that the load is evenly distributed on the ground. > Ensure that the base is levelled. > Fit the first level frames from inside the tower. > Fit the access frame opposite the ladder. > Ensure that the tower is stable. > Centre the load in the forks. Table of components Fit a temporary deck. Raise the deck to its final position so that there is 2.00 m between decks. 7 • The first-level deck can be removed. • Access the upper level and fit and adjust the adjustable heads. 1 2 3 Access • Erect the base and level it. • Lay the frames on the first level with the access frame. • Lay 3 x 0.30 m Panaciers. • Add frames on the second level. • Lay a 0.30 m Panacier • The upper level can be accessed using the integral ladder. • Add 2 x 0.30 m Panaciers. 4 5 6 • Fit the frames on the third level. • Remove 2 x 0.30 m Panaciers. • Lower the lower level to remove the third Panacier. • Lay one 0.20 m Panacier and a access deck. Temporary deck 3 x 0.30 x 1.00 m Panaciers Final deck 1 access deck and one 0.20 x 1.00 m Panacier Dismantling: dismantle the tower in the reverse order of assembly. Type of tower 1 2 3 4 5 Number for frame levels 1 2 3 4 5 Max. height (m) 1.82* 2.37 3.37 4.37 5.37 Min. height (m) 2.46 3.46 4.46 5.46 6.46 Screw jack 4 4 4 4 4 1.00 m ledger 4 4 4 4 4 1.00 m access frame 1 1 1 1 1 1.00 frame 3 7 11 15 19 Adjustable fork head 4 4 4 4 4 Access deck 1.00 0/2 2 2** 4 4 Panacier 0.20 x 1.00 0 1 1 2 2 Panacier 0.30 x 1.00 0/3 0 0** 0** 0** Weight (kg) 130/140 190 230 290 330 * Minimum height determined by the length of the 2 screw jacks and heads. ** Allow an additional three 0.30 x 1.00 m Panacier for assembling towers with more than 3 levels. 111 01.11.17 T e c h n i c a l i n f o r m a t i o n