105 MULTICRAB - TECHNICAL INFORMATION - 2023 MULTICRAB ASSEMBLY MODULE: HEIGHT 5.00 m MODULE: HEIGHT 6.00 m Follow the assembly phases with SAD safety guardrail and lay assembly decks in the stabilisers. ASSEMBLY / DISMANTLING •For modules (single or double) 3.00 m or 5.00 m high, access can be inside or outside depending on the desired levels of decks. •The size of the footing is defined for wind limited to 65 km/h (working wind according to NF EN 12811-1) and ground adhesion of 50%. For stronger winds, the structures must be anchored or ballasted. •All ballasted structures undergo a case study. •When handling or lifting, follow the instructions presented in this technical information on page 99. SELF-SUPPORTING TOWERS 4-STANDARD UNCOVERED SELF-SUPPORTING TOWER / VWDE &RPSOHWH GHFN / VWDE / + + Follow the assembly phases with SAD safety guardrail and lay assembly decks in the stabilisers. ASSEMBLY / DISMANTLING •MULTICRAB uprights are double bolted. •Maximum jack extension of the adjustable baseplate: 10 cm. • Check sliding stability according to the bearing element. • Never use the tower in winds exceeding 65 km/h. Plan View For the technical data on the lengths of the stabilisers and for TOWERS ANCHORED by wall plate tube, refer to the ''Technical Data'' chapter to know the forces running through the anchor points according to the layout zone and this, for covered or non-covered towers.
RkJQdWJsaXNoZXIy OTQ2MzM=